 |
Data Sheet
|
|||
|
Data Sheet |
|||
Multilayers Polyimide composite 6050M
Properties and Application:
ST6050M is a kind of polyimide composite materials, which is made of two or three layers Polyimide film,
bonded by H grade resin adhesive, with excellent dielectric property, good thermo-resistant property, low water
absorbing and low shrinkage properties. It is normally used in the dry type transformer as insulation material
between the HV and LV. which is the development product of ST6020M . It can be also used in the electronical
application because of the lowest pinhole rate.
Main Specification
|
Properties |
Unit |
Values |
|||
|
Nominal thickness |
mm |
0.05 |
0.25 |
0.5 |
0.75* |
|
Thickness tolerance |
mm |
＼0.05 |
＼0.06 |
＼0.06 |
＼0.08 |
|
layers of polyimide |
--- |
2 |
2 |
2 or 4 |
3 |
|
Weight and its tolerance |
g/m^2 |
75＼10 |
350＼45 |
700＼85 |
1050＼120 |
|
Breakdown strength |
KV |
−9 |
−25 |
−30 |
−35 |
*If you want more thicker than this value,please contact our engineer.
Product supply:
1.
Packing: the material is usually supplied in rolls;
2. Width: 500mm~900mm;
3. Other width or thicknesses are available upon your requests.
Note:
1. Above values are the accumulative typical ones by recognized testing method, but, in order to ensure you to
select our products properly, please refer to above specification and test the samples based on your using purpose
or feel free to contact our engineers for further and better understanding.
2. The color is only confirmed by samples.
_________________________________________