![]() |
||
Data Sheet |
Polyimide film adhesive tape ST650
Properties and Application:
Polyimide film is synthesized by polymerizing PMDA and ODA in strong polar solvents through the process of forming
film and imine treatment at high temperature, which possesses excellent physical, chemical, and electrical properties,
atomic radiation resistant, solvent resistant, low & high temperature resistant, It performs successfully in the wide range
of temperature as low as -452F(-269c) and as high as +752F(+400c). Because of its unique excellent properties, it is
the most ideal choice in many applications.
Main Specification
Properties |
Unit |
Values |
||||||||||
um(mil) |
12.5(0.5) |
15(0.6) |
25(1) |
40(1.6) |
50(2) |
75(3) |
100(4) |
125(5) |
||||
Density |
g/cm3 |
|
1.42 ±0.2 |
|||||||||
Tensile Strength |
MD ≥ |
MPa (psi×103) |
140(20) |
150(22) |
170 (25) |
165(24) |
150 (22) |
145 (21) |
130 (19) |
|||
TD ≥ |
115(17) |
120 |
165(24) |
140(20) |
135(20) |
120(17) |
110(16) |
|||||
Elongation ≥ |
% |
35 |
35 |
50 |
60 |
|||||||
Shrinkage (only for reference, not for supply standard) |
150℃(302F) 30min ≤ |
% |
1.0 |
1.0 |
0.2 |
|||||||
400℃(752F) 30min ≤ |
3.0 |
3.0 |
2.0 |
|||||||||
Breakdown Strength ≥ (48~62Hz) |
Average |
MV/m (V/mil) |
160 (4000) |
160 (4000) |
180 (4500) |
170 (4300) |
160 (4000) |
145 (3700) |
120 (3000) |
115 (2900) |
||
Individual |
100 (2500) |
100 (2500) |
140 (3500) |
135 (3400) |
130 (3300) |
120 (3000) |
100 (2500) |
90 (2300) |
||||
*Surface Resistance, 200℃(392F) ≥ |
Ω |
1.0×1013 |
||||||||||
*Volume Resistance, 200℃(392F) ≥ |
Ω·m |
1.0×1010 |
||||||||||
*Dielectric Constant 48~62Hz |
--- |
3.5± 0.4 |
||||||||||
*Loss Tangent 48~62Hz ≤ |
--- |
4.0×10-3 |
Note: The items marked * are the inherent properties of KYPI, which are not showed on the testing report for outgoing factory.
Application:
1. For wrapping of magnet wire and cable, slot liner insulation, interlayer insulation in Motor, transformer etc.
2. The backing material for Polyimide pressure-sensitive adhesive tape, PIFEP tape.
3. The substrates or overlay of Flexible Printed Circuits Board (F-PCB).
4. Polyimide tubing.
Product supply
1. THK Tolerance: +/-10%
2. Min Qty: 100kgs/lot
3. Packing:25~50 Kgs/carton
4. Core ID:76mm, Core materials: Paper or plastic;
Note:
1.Above values are the accumulative typical ones by recognized testing method, but, in order to ensure you to
select our products properly, please refer to above specification and test the samples based on your using
purpose or feel free to contact our engineers for further and better understanding.
2. The color is only confirmed by samples.
____________________________________________